fbpx Skip to main content

Restore power and gas to your stove:

Ensure that all stove and oven knobs are in the OFF position.

Either

  1. Play the reboot sound recording on full volume on your phone by clicking the button below. Position your phone behind the back of the stove (between your stove and the wall), so the FireAvert device can hear the sound recording. Your stove should reboot to normal use within 30-45 seconds of playing the recording:
    IMPORTANT NOTE: Check if your stove requires a manual pilot light. All pilot lights on older stoves must be re-ignited after the FireAvert device has been rebooted.

Or

  1. Go to your breaker panel and locate the stove/range circuit switch.
  2. Turn the stove breaker switch OFF for 3-5 seconds, then turn it back ON.
  3. Pull out the stove, exposing the Red FireAvert device. The LED (light indicator) on the device will turn BLUE after the breaker has been reset.
  4. Press the reset button on the FireAvert device.
    IMPORTANT NOTE: Check if your stove requires a manual pilot light. All pilot lights on older stoves must be re-ignited after the FireAvert device has been rebooted.

Now you’re back to cooking!

Still not working? Reach out to our support team.